Pigment and Fillers

---

• High-opacity white pigment for brightness and coverage.
• Purity ≥ 98%, Rutile grade, Particle size < 0.5 μm

• Used for red, yellow, brown, and black shades.
• Heat stable up to 800°C, Oil absorption: 15–25 g/100g

• Deep black pigment with high tint strength.
• Surface area: 50–300 m²/g, Tint strength ≥ 100% (ASTM D3265)

• Extender for volume, gloss control, and surface smoothness.
• Brightness ≥ 95%, Particle size: 2–10 μm

• High-density, low-oil-absorption filler for gloss & chemical resistance.
• Specific gravity: 4.4–4.6, Oil absorption: 10–15 g/100g

For more information on all our solutions:

- write us at:  

• Aurelian@ingreda.com

• Excellent UV resistance and color retention.
• Tg: -20 to +60°C, Solids: 40–60%

• High strength and chemical resistance for protective coatings.
• Epoxy equivalent weight: 180–190 g/eq

• High flexibility, durability, and abrasion resistance.
• Solids: 55–70%, Shore A hardness: 70–90

• Used in decorative and architectural coatings.
• Oil length: Short/Medium/Long, Drying time: 4–6 hrs

• Crosslinkable resins for powder and coil coatings.
• Acid value: 30–70 mg KOH/g, Tg: 40–90°C

For more information on all our solutions:

- write us at:  

• Aurelian@ingreda.com

• Fast evaporating solvent for nitrocellulose and epoxy coatings.
• Boiling point: 79.6°C, Evaporation rate: 3.8

• Mid-evaporation solvent for alkyd and oil-based paints.
• Boiling point: 137–144°C, Flash point: 27°C

• Good solvency and flow control in automotive coatings.
• Boiling point: 126°C, VOC: ~880 g/L

• Coalescing agent for waterborne systems.
• Boiling point: 145°C, VOC: ~970 g/L

• Used in water-based dispersions and cleaning.
• Purity: ≥99%, Flash point: 12°C

For more information on all our solutions:

- write us at:  

• Aurelian@ingreda.com

• Improve pigment wetting and prevent flocculation.
• Effective pH range: 6–10, Active content: 30–40%

• Eliminate entrapped air and surface foam.
• Silicone-based, Viscosity: 100–1000 cps

• Viscosity control and anti-sag properties.
• Brookfield viscosity: 5,000–100,000 cps

• Protect films from degradation and yellowing.
• Absorption range: 290–400 nm

• Promote uniform film formation and pigment dispersion.
• Surface tension reduction: ≥30%, Active content: 40–60%

For more information on all our solutions:

- write us at: 

• Aurelian@ingreda.com

• Used for whiteness, plasticity, and surface finish.
• Brightness: 80–90%, Particle size: <2 μm

• Fluxing agent for vitrification in ceramics.
• Na₂O or K₂O content: 8–12%, Fusion point: ~1100°C

• Adds rigidity and thermal resistance to ceramic bodies.
• Purity ≥ 99.5%, Particle size: 45–200 mesh

• Used for high-strength and wear-resistant ceramics.
• Al₂O₃ ≥ 99.6%, Specific surface area: 2–8 m²/g

• Improves workability and green strength in shaping.
• Plasticity index: High, Moisture content: ≤10%

For more information on all our solutions:

- write us at:  

• Aurelian@ingreda.com