Bleaching Agents

---

• An oxidizing agent used in initial bleaching stages to break down lignin.
• 10–15% NaOCl, pH 11–13, yellow-green liquid

• A strong oxidizer used in eco-friendly bleaching processes.
• 15% solution, pH <2, strong vinegar-like odour

• Applied in ECF/TCF bleaching for delignification.
• Used at 0.5–1.5% consistency, highly reactive gas

• Xylanase enzymes used to enhance brightness and reduce chemical consumption.
• Active at pH 5–8, 50–60°C optimal temperature

• Used as a pH buffer and mild bleaching agent to reduce corrosion.
• ≥95% purity, slurry pH 10.5–11.5

For more information on all our solutions:

- write us at: tariq@ingreda.com

• Improve surface strength and ink holdout on paper.
• Solid content ~30%, anionic, light yellow color

• Enhances ink jet printability and water resistance.
• 25–35% solids, anionic, pH 7–8

• Used for acid sizing systems to enhance internal sizing.
• 20–30% solids, pH 4.5–5.5

• Improves water resistance and surface cohesion.
• MW ~40,000, water soluble, pH 5–7

• Improves printability and controls dusting when applied at the size press.
• Viscosity 50–500 cps, solids 10–12%

For more information on all our solutions:

- write us at: tariq@ingreda.com

• Provides higher brightness and improved printing surface.
• Particle size <2 µm, brightness >95%, CaCO₃ >98%

• Enhances optical properties and offers antimicrobial protection.
• ≥99.5% purity, particle size <0.5 µm

• Improves print smoothness and reduces dusting.
• Particle size ~1–2 µm, moisture <10%

• Used for high-opacity and high-density applications.
• ≥98% purity, whiteness >94%, pH neutral

• Improves ink absorption and high-end print quality.
• Surface area >300 m²/g, amorphous white powder

For more information on all our solutions:

- write us at: tariq@ingreda.com

• Enhances internal strength and retention.
• Cationic degree 0.02–0.05, moisture <10%

• Provide flexibility and surface strength in coated papers.
• Solids ~50%, pH 7–9, milky white emulsion

• Improves dry strength through covalent bonding with fibres.
• MW >500,000, pH 5–6, solids 10–15%

• Used as a biodegradable binder with film-forming properties.
• Viscosity 200–800 cps, bloom strength 150–300

For more information on all our solutions:

- write us at: tariq@ingreda.com

• Enhances dry strength without compromising wet strength.
• MW >400,000, solids 10–15%

• Forms ionic bonds with fibers to boost dry strength.
• 20–30% solids, pH 6–7, viscosity 300–1000 cps

• Acts as a wet strength agent via thermoset networks.
• 50% solids, cationic, pH 10–11

• Cost-effective resin used in tissues and towels.
• 60% solids, formaldehyde <0.1%

• Provide controlled wet strength with reduced formaldehyde.
• 40–50% solids, low VOC, pH 3–5

For more information on all our solutions:

- write us at: tariq@ingreda.com

• Non-silicone defoamers with rapid foam knockdown.
• 100% active, viscosity 500–800 cps, pH 6–7.

• Effective foam control in alkaline systems.
• ~50% solids, melting point ~150°C

• Used for fine particle retention in the wet-end.
• MW ~4 million, pH 7–9, white powder

• Enhance filler/fiber retention in paper machines.
• Cationic charge 5–10%, MW ~8 million

• Used in dual polymer systems for drainage & retention.
• Particle size <0.1 µm (colloidal silica), pH 9–10

For more information on all our solutions:

- write us at: tariq@ingreda.com